Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual page 102

5D Keyboard Tracking Intensity: This parameter determines keyboard tracking intensity for the
specified keyboard area. Positive values will make high notes brighter. Negative values have the
opposite effect. For a value of 0, the Cutoff Frequency changes linearly with regard to key pitch.
For a value of –50, the Cutoff Frequency is the same for all notes.
Keyboard Tracking EG Time: This parameter determines how the VDF1 EG Time parameters
are affected by keyboard tracking. It affects the VDF1 EG Attack, Decay, Slope, and Release Time
parameters equally. Although, the direction of change can be set independently for each
parameter. The Keyboard Tracking mode and Key parameters can be used to specify the keyboard
area that is affected.
5E Attack, Decay, Slope, Release Times: These parameters determine whether the VDF1 EG Time
parameters are reduced or increased with keyboard tracking. For a negative (–) value, notes above
the specified key will have their VDF EG times increased. For a positive (+) value, notes above
the specified key will have their VDF EG times decreased. A setting of 0 means no effect.
VDF EG Time parameter
settings (all parameters +)
Note on
Cutoff frequency Int >0
C-1 Key G9
When keyboard mode set to
HIGH, EG Time changes
(5E parameters set to –)
Note off Note on
Effect on low notes
Int =0
Int = –50
Int <–50
(keyboard tracking mode: ALL)
Time
–
+
C-1 Key G9
Note off Note on
Effect on high notes
Reference Guide
Note off
89
1
Program
Parameters