Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual page 109

Reference Guide
13A–13E Pitch2 Modulation
These parameters allow you to modulate the pitch of Oscillator2 periodically. Modulation
frequency and intensity can also be controlled using After Touch and Pitch Modulation MIDI
Controller1. Operation is the same as for Pitch1 Modulation. See "12A–12E Pitch1 Modulation"
on page 94.
13A PITCH 2 MG ø
SAW XFrq00 InT00
14A–14C VDF Modulation
These parameters allows you to modulate the Cutoff Frequency of VDF1, VDF2, or both.
14A VDF MG
TRI Frq00 Int00
LCD Parameter
Waveform
14A
Frequency (Frq)
Intensity (Int)
Delay
14B
Oscillator Select
(OSC)
Keyboard Sync
14C
(K.Sync)
These parameters are the same as those for Pitch MG, except that the Fade In Time parameter is
not included here. The fade in time changes according to the Delay setting.
14A Waveform: This parameter selects the type of modulation waveform.
Triangle
Sawtooth
Sawtooth
Note: When Square 1 is selected and the filter is completely open, the Cutoff Frequency does not
change.
Frequency: This parameter sets the modulation speed.
Intensity: This parameter sets the modulation intensity.
14B Delay: Determines time from note-on to modulation start.
Oscillator Select: This parameter allows you to apply modulation to VDF1, VDF2, or both.
96
13B PITCH 2 MG ø
Delay00 FadeIn00
13A 13B
14B VDF MG
Delay00 OSC= OFF
14A 14B
Range
TRI
SAW
SAW
SQR1
RAND
SQR2
0–99
0–99
0–99
OFF
OSC1
OSC2
BOTH
OFF
ON
Square1
Random
Square2
13C PITCH 2 MG ø 13D PMG2 FREQ
K.Sync:OFF K.TRK+00
13C
14C VDF MG
K.Sync:OFF
14C
Triangle
Sawtooth
Sawtooth
Square1
Random
Square2
Modulation Speed
Modulation Intensity
Time from note-on to modulation start
Modulation off
Modulation for VDF1
Modulation for VDF2
modulation for VDF1 and VDF2
OFF: modulation will continue for subsequent notes
ON: modulation will restart for each new note
Note on
VDF Cutoff
Frequency
setting
ø 13E PMG2 INT
A+J=0 Aft=00 XJoyUP=00
13D
Description
Fade in time
Delay
determined by
Delay parameter
ø
13E
Intensity
Time