Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual page 169

Reference Guide
5A Preset Data Load
These parameters allow you to load 100 Combinations, 100 Programs, two Drum Kits of Preset a
or b, preset Multi Setup data, and preset Global data into the internal memory.
05A PRESET DATA
ALL PRE-b
LCD Parameter
Preset Data Load
Source
Source ALL
Source PRG/CMB
Source No.
5A PRG/CMB
Destination No.
PRG/CMB
Source KIT
Source No. KIT
Destination No. KIT
OK to Load
Use the [ ], [®], [ ], and [ ] keys to select data to load, move the cursor to "OK?", and press
the [ ] key to load. (The existing data in the internal memory will be overwritten and lost.)
The following data can be loaded:
Preset a:
100 Programs of Preset a
100 Combinations of Preset a
Drum Kits 1, 2 of Preset a
Preset b:
100 Programs of Preset b
100 Combinations of Preset b
Drum Kits 1, 2 of Preset b
Multi Setup data:
Default settings when the power is turned on (see page 114)
Global data:
Master tune .......................... 0
Transpose............................. 0
Velocity Curve ..................... 3
After Touch Curve ............... 3
Scale Type............................ Equal Temp
Scale Key ............................. C
User Scale............................ –52 for E and B, 0 for others
Sub Scale Type .................... User Scale
Sub Scale Key...................... C
MIDI Global channel........... 1
Note Receive........................ ALL
External Out Select ............. MIDI
MIDI Filter .......................... NUM for PRG, DIS for EX, ENA for others
156
OK?
5A
Range
ALL
Combination (CMB)
Program (PRG)
Drum Kit (KIT)
PER-a, PER-b
a, b
00–99
00–99
a, b
K1, K2
K1, K2
OK?
Description
Select a preset data source to load.
Loads all data of Preset a or b, Multi data, and Global data.
Loads one Combination of Preset a or b.
Loads one Program of Preset a or b.
Loads one Drum Kit of Preset a or b.
(When ALL is selected:)
Loads either Preset a or b, Multi Setup data, and Global data.
(When CMB or PRG is selected:)
Selects Preset a or b as a source.
(When CMB or PRG is selected:)
Selects a source Program/Combination number.
(When CMB or PRG is selected:)
Selects a destination Program/Combination number.
(When KIT is selected:)
Selects Preset a or b as a source.
(When KIT is selected:)
Selects a source Drum Kit number.
(When KIT is selected:)
Selects a destination Drum Kit number.
Executes the Preset Data Load operation.