About The Midi Filter - Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual

About the MIDI Filter

The X5DR has a MIDI Filter function that cuts certain MIDI data (i.e., prevents MIDI data from
being received) for various performances. You can set the MIDI filter in Global mode. You can also
set the MIDI filter for each Track in Multi mode. Combinations also have a MIDI filter for each
Timbre, and the X5DR stores the filter settings for each Combination.
MIDI IN
TO HOST
The MIDI Filter in Global mode is the setting common to all modes. If you want to set the X5DR
so that it will ignore certain data for a specified Timbre or Track in Combination Play mode or
Multi mode, set the MIDI Filter in the corresponding Timbre or Track.
There are four options: DIS, ENA, PRG, and NUM for the Program Change Filter in Global mode.
If you want the X5DR to ignore the Program Change and Bank Select messages, set this parameter
to DIS. If you want the X5DR to receive both Program Change and Bank Select messages, set this
to ENA or PRG. To set the X5DR so that it will ignore only the Bank Select message (Program
Change messages will be received), set this to NUM.
If you select ENA or PRG, the X5DR responds to these messages in the same way in both Program
Play mode and Multi mode.
In Combination Play mode, the X5DR responds to Program Change messages sent on the same
MIDI channel as the Global MIDI Channel differently with ENA and PRG settings. When ENA
is selected, the Program Change messages sent on the same MIDI channel as the Global MIDI
Channel will switch Combinations. When PRG is selected, the Program Change messages will
switch Timbre Programs.
Set the Program Change Filter in Global mode and in Combinations depending on how you play
the X5DR.
Global mode
Note Receive Filter
Receiving Note On/Off
ALL: receiving all.
EVEN: receiving only even
note numbers.
ODD: receiving only odd
note numbers.
Program Change Filter
Receiving Program Change
DIS: not transmitting/receiving
ENA: transmitting/receiving
COMBI No. and PROG No.
PRG: transmitting/receiving
only PROG No.
NUM: not transmitting/receiving
only Program Change
After Touch Filter
Receiving After Touch
DIS: not receiving
ENA: receiving
MIDI Controller Filter
Receiving Pitch Bend and
Control Change
DIS: not receiving
ENA: receiving
System Exclusive Filter
Transmitting/Receiving Exclusive
DIS: not transmitting/receiving
ENA: transmitting/receiving
In Program Play mode
Program
In Combination Play mode and Multi mode
Program Change Filter
Receiving Program Change
DIS: not rece iving
ENA: receiving
Damper Filter
Receiving Damper pedal
(CTRL#64)
DIS: not receiving
ENA: receiving
After Touch Filter
Receiving After Touch
DIS: not receiving
ENA: receiving
Control Change Filter
Receiving Control Change
DIS: not receiving
ENA: receiving
Basic Guide
Each Timbre
Each Track
5
About
MIDI
75