Registration Failed - VTech CS6449 User Manual

Appendix
Display screen messages
** Paging **
Paging
all handsets
Phone
Place in
charger
1.Press FIND HS
on base 4sec
Rec mem full
Rec mem low
Recording
message
Registering...
Please wait
Registration
failed
Registration
slots are full
Ringer off
Saved
Share call
Speaker
2.Then press #
on handset
Unable to call.
Line in use
Unable to call.
Try again
XX Missed calls
The cordless handset is paged by the telephone base.
The telephone base is paging the handset(s).
The handset is on a call.
The battery is very low. The handset should be charged.
Screen display before handset registration.
The system recording time is full.
The system recording time is low.
The answering system is recording a message.
The handset screen display when it is registering to the
telephone base.
The handset registration is not successful.
You register a handset to the base when you already have
5 handsets registered.
The ringer is off temporarily during an incoming call.
The entry in the call log history is saved in the directory.
You can share an outside call with the telephone base or
another cordless handset.
The handset or telephone base speakerphone is in use.
Screen display before handset registration.
Failed phone call (the telephone line is in use).
Failed intercom or conference call (there are already two
handsets being used).
There are new calls in the call log.
60