Expand Your Telephone System; Add And Register A Handset - VTech CS6449 User Manual

User manual
Hide thumbs Also See for CS6449:
Table of Contents

Advertisement

Appendix

Expand your telephone system

Your telephone base can support up to 5 handsets. Each handset must be
registered to the telephone base before use.
The handset provided with your telephone system is already registered and
named HANDSET. You can add new handsets (CS6400, purchased separately)
to your telephone base. Additional handsets are assigned numbers in the
sequential order (HANDSET 2, HANDSET 3, HANDSET 4 and HANDSET 5).

Add and register a handset

When first purchased, each expansion handset alternately
shows 1.Press FIND HS on base 4sec and
2.Then press # on handset. The new handset should be
charged without interruption for at least 30 minutes before
registering it to the telephone base.
To register a handset:
1.
Make sure the handset is out of the handset charger and
is put near the telephone base. Make sure the handset
alternately shows 1.Press FIND HS on base 4sec and
2.Then press # on handset before you begin registration.
Press and hold FIND HANDSET on the telephone base
2.
for about four seconds until the telephone base shows
Registering... Please wait, then release the button.
Press # (pound key) on the handset. The handset
3.
shows Registering... Please wait. It takes up to 60
seconds to complete registration. Then
HANDSET X Registered appears on both screens,
with X being the handset number, and the handset beeps.
The handset is now registered with the
telephone base.
If registration fails, the handset displays Registration failed.
Please start again from Step 1 above.
You cannot register a handset if any other system
handset is in use.
The telephone base shows Registration slots are full
when you try to register more than 5 handsets to it.
If you have not set the date and time for the telephone
system, the handset will prompt you to set the date
and time after it is registered to the base. To skip
setting, press
/CANCEL.
OFF
64
1.Press FIND HS
on base 4sec
2.Then press #
on handset
Registering...
Please wait
Registering...
Please wait
HANDSET X
Registered
HANDSET X
Registered

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs6449-2Cs6449-3

Table of Contents