Deregistering A Cordless Headset; Deregistering The Cordless Headset Without The Deskset; Cordless Accessory Registration And Deregistration Time-Out - VTech VSP735 User Manual

Cordless Headset

Deregistering a cordless headset

You must deregister a cordless headset from its original deskset before you can
register it to a different deskset.
To deregister a cordless headset:
1. When the phone to which the headset is registered is idle, press Menu.
2. Press q to highlight User Settings, and then press SELECT.
3. Press q to highlight DECT Headset, and then press SELECT.
The DECT headset menu appears.
4. Press q to highlight Deregister, and then press
The deskset screen displays DECT headset is deregistered. The cordless
headset ON/OFF light flashes twice every five seconds to indicate it is not
registered.
The DECT headset menu appears.

Deregistering the cordless headset without the deskset

Cordless headsets can also be deregistered using the headset. You can use
this method when you cannot use the deskset for standard deregistration. The
deskset may be out of range or may have been removed from the system.
To deregister the cordless headset when the deskset is not available:
On the headset, press VOL+ > ON/OFF > VOL– > ON/OFF > VOL+ > VOL– >
ON/OFF.

Cordless accessory registration and deregistration time-out

If the cordless device is registered to another deskset or telephone, it must be
deregistered first. See "Deregistering a cordless headset".
For security reasons, the registration process on both the deskset and the
cordless accessory terminates after the time-out period of two minutes if
registration is not successful.
If the registration process times out on the cordless accessory, the cordless
accessory resets itself. If the registration process times out on the deskset, it
displays Registration Failed and returns to Idle mode.
If cordless headset registration fails, the ON/OFF light on the headset flashes
twice every five seconds. To reset the headset, lift the headset out of its charging
base, place it back in the charger, and try the registration process again.
Select
54
.