Set Date And Time - VTech CS6449 User Manual

Telephone settings

Set date and time

The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If
you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information. You can also turn off the
date and time settings of the caller ID service (see CID time synchronization on
page 17) and set the date and time manually.
Press MENU/
1.
base is not in use.
2. Press or
/SELECT.
MENU
3. Press or
/SELECT.
MENU
/SELECT to choose >Date & time.
4. Press
MENU
5. Press or
SELECT, or use the dialing keys to enter a two-digit
MENU/
number (01-12).
6. Press or
or use the dialing keys to enter a two-digit number
(01-31).
7. Press or
or use the dialing keys to enter a two-digit number
(00-99) then press
8. Press or
or use the dialing keys to enter a two-digit number
(01-12).
9. Press or
dialing keys to enter a two-digit number (00-59).
10. Press or
11. Press /SELECT to save the settings and return to the previous menu.
MENU
You hear a confirmation tone.
• If the date and time are not set when a message is recorded, the system
announces, "Time and date not set," before each message plays.
• The telephone plays two beeps if you enter an invalid number.
when the handset or the telephone
SELECT
to highlight >Settings, then press
to highlight >Set date/time, then press
to select the month then press
to select the date then press
to select the year then press
SELECT.
MENU/
to select the hour then press
to select the minute then press
to highlight AM or PM, or press 2 for AM or 7 for PM.
SELECT,
MENU/
SELECT,
MENU/
SELECT,
MENU/
SELECT, or use the
MENU/
16 16
Key tone
>Set date/time
>Date & time
CID time sync
SET DATE
--/--/--
SET TIME
--:-- --