Installation Options; Tabletop To Wall Mount Installation - VTech CS6449 User Manual

Getting started

Installation options

Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, rotate the wall mount bracket down to connect with a
standard dual-stud telephone wall mounting plate. If you do not have this
mounting plate, you can purchase one from many hardware or consumer
electronics retailers. You may need a professional to install the mounting plate.

Tabletop to wall mount installation

1. Press down the switch hook and slide the handset tab upward to remove it
from the slot. Rotate the handset tab by 180 degrees. Press down the switch
hook and then replace the handset tab to its slot. The protruding edge of the
handset tab holds the corded handset in place when the phone is mounted on
the wall.
Switch
hook
Handset
tab
2. Remove the telephone line cord and the power adapter cord from the grooves.
Make sure both cords are plugged into the jacks at the bottom of the telephone
base accordingly.
5