Cid Time Synchronization; Home Area Code - VTech CS6449 User Manual

Telephone settings

CID time synchronization

This feature allows the time and date to be set by incoming caller ID information.
The default setting is On.
Press MENU/
1.
base is not in use.
2. Press or
/SELECT.
MENU
3. Press or
/SELECT.
MENU
4. Press or
/SELECT.
MENU
5. Press or
/SELECT to save your selection and return to the
6. Press
MENU
previous menu. You hear a confirmation tone.

Home area code

If you dial your local calls using only seven digits (area code not required), you
can program your home area code so that when you receive a call within your
local area, the telephone number is automatically stored without the area code in
the call log.
Press MENU/
1.
2. Press or
3. Press or
4. Use the dialing keys to enter a three-digit home area code.
• Press
MUTE
X/DELETE or CANCEL on the telephone base to delete
a digit.
• Press and hold
X/DELETE on the telephone base to delete all digits.
• Press or
/SELECT to save your selection and return to
5. Press
MENU
the previous menu. You hear a confirmation tone.
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the
home area code you have already programmed, following the steps above. After
you have deleted the home area code, _ _ _ will appear on the display.
when the handset or the telephone
SELECT
to highlight >Settings, then press
to highlight >Set date/time, then press
to highlight >CID time sync, then press
to choose >On or >Off.
when the handset or the telephone base is not in use.
SELECT
to highlight >Settings, then press
to highlight >Home area code, then press
/DELETE or
OFF
/DELETE on the handset, or
MUTE
to move the cursor to the left or right.
/CANCEL on the handset, or
17 17
Key tone
>Set date/time
Date & time
>CID time sync
CID TIME SYNC
>On
/SELECT.
MENU
/SELECT.
MENU
Set date/time
>Home area code
HOME AREA CODE
---