VTech CS6449 Quick Start Manual

®
Quick start guide (Canada version)
CS6449/CS6449-2/CS6449-3
Introduction
This quick start guide provides you with the basic installation
and use instructions. A limited set of features are described in
abbreviated form.
Please refer to the user's manual for complete installation and
.
operation instructions
Telephone base and handset charger installation
Install the telephone base and handset charger as shown below.
If you have DSL
high-speed Internet
service, a DSL filter
Telephone base
(not included) is
power adapter
required.
Electrical outlet not
Telephone controlled by a wall
line cord switch
Telephone
wall jack
Charger adapter
Telephone base
Handset battery installation and charging
Install the battery as shown below. Once you have installed the battery,
you may be able to make and receive short calls. For best performance,
charge the handset battery continuously for at least 11 hours.
1. Plug the battery connector 2. Place the battery with the
securely into the socket label THIS SIDE UP facing
inside the handset battery up and the wires inside the
compartment, matching the battery compartment.
color-coded label.
3. Align the cover flat against the 4. Charge the handset by
battery compartment, then placing it in the handset
slide it towards the center of the charger. The CHARGE light
handset until it clicks into place. is on when the handset is
charging.
CHARGE light
remains on when
charging.
Handset overview
/ /VOLUME (directory)
Review the directory when
the handset is not in use.
Scroll up while in a menu.
Increase the listening volume
during a call or message
playback.
Move the cursor to the right
when entering numbers or
names.
CHARGE light
On when the handset is
charging.
MUTE/DELETE
Mute the microphone
during a call.
Delete the displayed entry
while in the directory, call
log or redial list.
Silence the ringer
temporarily while the
handset is ringing.
Delete digits or characters
while using the dialing keys.
/FLASH
Make or answer a call.
Answer a call waiting call
during a call.
1
Press repeatedly to add
or remove 1 in front of
Charger
the call log entry before
dialing or saving it to the
directory.
TONE
Switch to tone dialing
temporarily while on a call.
(Speakerphone)
REDIAL/PAUSE
Make or answer a call using the
Press to review the redial list.
handset speakerphone.
Press and hold to insert a dialing
Switch between the
pause while entering numbers.
speakerphone and the handset
during a call.
Telephone base overview
MENU/SELECT
CID/ /VOLUME (caller ID)
Show the menu.
Review the call log when the
Choose an item, or save an entry or setting while
handset is not in use.
in a menu.
Scroll down while in a menu.
Decrease the listening volume
during a call or message
Review the directory when the base is
playback.
not in use.
Move the cursor to the left when
Scroll up while in a menu.
entering numbers or names.
Move the cursor to the right when
entering numbers or names.
MENU/SELECT
Show the menu. CID (caller ID)
Choose an item, or save an
Review the call log when
entry or setting while in a
the base is not in use.
menu.
Scroll down while in a
menu.
Move the cursor to
OFF/CANCEL
the left when entering
Hang up a call. numbers or names.
Silence the ringer
FLASH
temporarily while the
Answer a call waiting call
handset is ringing.
during a call.
Press and hold to delete
the missed call indicator
1
while the handset is not
in use.
Press repeatedly to add or
Press to return to the remove 1 in front of the call log
entry before dialing or saving it
previous menu, or
to the directory.
press and hold to return
to idle mode without
CANCEL
making changes.
Silence the ringer temporarily while
the telephone base is ringing.
Dialing keys
Press and hold to delete the
Enter numbers or
missed call indicator while the base
characters. is not in use.
Press to return to the previous menu,
Answer an incoming call.
or press and hold to return to idle
mode without making changes.
#
(pound key)
/PLAY/STOP
Press repeatedly to
show other dialing
Play messages.
options when reviewing
Stop message playback.
a call log entry.
Flashes when there are new messages
or memos in the answering system.
INT
/REPEAT
Initiate or answer an intercom
Repeat a message or press twice
call, or to transfer a call.
to play the previous message.
Dialing keys
Enter numbers or
characters.
Answer an incoming
call.
TONE
Switch to tone dialing
temporarily while on
a call.
MIC
Microphone.
MUTE
Mute the microphone during a call.
Silence the ringer temporarily while
the telephone base is ringing.
/ANS ON/OFF
Turn the answering system
on or off.
REDIAL/PAUSE
Press to review the redial list.
Press and hold to insert a dialing
pause while entering numbers.
Using the menu
To enter the menu:
1. Press MENU/
SELECT
2. Press or until the screen displays the desired feature menu.
SELECT to enter that menu.
3. Press
MENU/
• To return to the previous menu, press
handset or CANCEL on the telephone base.
INT
• To return to idle mode, press and hold
Initiate or answer an handset or CANCEL on the telephone base.
intercom call, or to
transfer a call.
Telephone settings
Default settings are indicated by asterisks (*).
Screen display
LCD language Set the screen display language.
Clr voicemail Turn off the voicemail indicators.
Key tone Turn the key tone on or off.
Set date/time
Set the date and time for the
telephone, or enable the date and
time to be set by incoming caller
ID information.
Home area code Enter your home area code if you
FIND HANDSET
dial only seven digits for local calls.
Page all system
Dial mode
Set the telephone to be tone or
handsets.
pulse dialing.
IN USE light
Set date and time
On when the phone is in use, or
1. Press MENU/
when the answering system is
SELECT
answering an incoming call.
Scroll to >Settings, then press
2.
On when a handset is being
3. Scroll to >Set date/time, then press
registered.
4. Press /SELECT to select >Date & time.
MENU
Flashes when there is an
5. Use the dialing keys (0-9) to enter the month, date and year, and
incoming call.
then press /SELECT to move on to set the time.
MENU
Flashes when the handsets are
6. Use the dialing keys (0-9) to enter the hour and minute.
being deregistered.
7. Press or to select AM or PM, or press 2 for AM or 7 for PM.
Flashes when another telephone
Then press /SELECT to save.
MENU
is in use on the same line.
Ringer volume
X/DELETE
Press MENU/
1.
Delete the playing SELECT
message.
2. Scroll to >Ringers, then press
Press twice to delete
3. Press /SELECT to select >Ringer volume.
MENU
all old messages
4. Press or to sample each volume level, then press
when the base is not
/SELECT to save.
in use. MENU
Delete digits or
Telephone operation
characters while using
the dialing keys. Make a call
Delete the displayed
Using a cordless handset:
entry while in the
• Press or
directory, call log or /FLASH
redial list.
-OR-
• Enter the telephone number and then press
/SKIP
to dial.
Skip to the next
Using the telephone base:
message.
• Lift the corded handset or press
base, and then dial the telephone number.
/SPEAKER
-OR-
Make, answer or end
a call. • Enter the telephone number, then press
corded handset to dial.
Switch between the
base speakerphone and
Answer a call
the corded handset.
Using a cordless handset:
VOL
• Press ,
/FLASH
Adjust the listening
Using the telephone base:
volume during a call or
• Lift the corded handset, or press
message playback.
Adjust the telephone
base ringer volume when
the base is not in use.
when the telephone is not in use.
/CANCEL on the
OFF
/CANCEL on the
OFF
Function Options
English*
Français
Espaňol
Turn off
indicator?
On*
Off
Date & time
CID time sync
_ _ _
Tone*
Pulse
when the telephone is not in use.
/SELECT.
MENU
/SELECT.
MENU
when the phone is not in use.
/SELECT.
MENU
, and then dial the telephone number.
or
/FLASH
/SPEAKER on the telephone
/SPEAKER or lift the
or any dialing key.
/SPEAKER or any dialing key.