Remote Access Code; Message Alert Tone - VTech CS6449 User Manual

Answering system settings

Remote access code

A two-digit security code is required to access the answering system remotely from any
touch-tone telephone. The preset code is 19. You can set the code from 00 to 99.
1. When the handset or the telephone base is not in use, press
MENU/
SELECT
2. Press or
/SELECT.
MENU
3. Press or
/SELECT.
MENU
4. Press or
/SELECT.
MENU
5. Use the dialing keys to enter a two-digit number.
/SELECT to save and you hear a
6. Press
MENU
confirmation tone.

Message alert tone

When the message alert tone is set to on, and there is at least one new
message, the telephone base beeps every 10 seconds.
is preset to off.
There is no audible alert at the handset.
1. When the handset or the telephone base is not in use, press
MENU/
SELECT
2. Press or
/SELECT.
MENU
3. Press or
/SELECT.
MENU
4. Press or
/SELECT.
MENU
5. Press or
/SELECT to save and you hear a
6. Press
MENU
confirmation tone.
The answering system must be turned on for message alert tone
to beep.
.
to scroll to >Answering sys, then press
to scroll to >Ans sys setup, then press
to scroll to >Remote code, then press
.
to scroll to >Answering sys, then press
to scroll to >Ans sys setup, then press
to scroll to >Msg alert tone, then press
to choose >On or >Off.
48
Answer ON/OFF
>Ans sys setup
# of rings
>Remote code
REMOTE CODE
The message alert tone
Answer ON/OFF
>Ans sys setup
Remote code
>Msg alert tone
MSG ALERT TONE
>On
19