Deregister Handsets - VTech CS6449 User Manual

Appendix

Deregister handsets

If you want to replace a handset, or reassign the designated handset number of
a registered handset, you must deregister all handsets that are registered to the
telephone base. Then register each handset individually.
To make deregistration easier, read all of the instructions on this page before
you begin.
To deregister all handsets:
1. Press and hold FIND HANDSET on the telephone base for about 10 seconds
until the telephone base shows Registering... Please wait followed by
Deregister all handsets?, then release the FIND HANDSET button.
2. Immediately press
3. The deregistration process takes about 60 seconds to complete. All handsets
alternately show 1.Press FIND HS on base 4sec and
2.Then press # on handset.
4. To register the handset(s) to the telephone base again, follow the registration
instructions on the previous page.
• You cannot deregister all handsets if any other system handset is in use.
• If deregistration fails, you may need to reset the system and try again. To reset,
unplug the power from the telephone base and plug it back in.
• Even if the battery is depleted, you can still deregister all handsets by following
the steps above. After the handset is charged for at least 10 minutes, its
screen alternately shows 1.Press FIND HS on base 4sec and 2.Then press #
on handset.
/SELECT or FIND HANDSET.
MENU
65