Registration; Reset Your Phone - VTech VT2032 User Manual

8.5

Registration

Your handset and base station is pre-registered. Up to five handsets can be registered to a single base station.
If for some reason, the handset is not registered to the base station (
handset according to the following procedure.
Using a handset:
U D
1. Press and / on the handset to select REGISTRATION.
2. Press OK and select the destination base you would like to register to.
3. Press OK and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press OK and go ahead with the following procedures using the base.
Using the base:
G
6. Press and hold on the base station for about five seconds, the base station is entered into registration mode.
If the handset registration is successful, you will hear a confirmation tone and the
allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handset registration
is unsuccessful, the will still flash.
8.6

Reset Your Phone

You can reset your phone to the default settings. After reset, all you personal settings and call list entries will be deleted, but your phonebook
remains unchanged.
U D
1. Press and / to select DEFAULT.
2. Press OK and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press OK to confirm.
5. Press OK to re-confirm.
flashes even when the handset is near the base station), register your
will stop flashing. The handset will automatically be
36