Answering system operation
Message playback
When playback begins, the total number of old or new messages is announced.
Before each message, you hear the day and time of the recording. If the date and
time are not set, you hear, "Time and date not set," before playback. After the last
message, you hear, "End of messages." If the recording time is less than three
minutes, you hear, "Less than three minutes to record." If there are no recorded
messages, the screen shows No message and you hear, "You have no message."
To play messages at the telephone base:
/PLAY/
•
Press
-OR-
Press MENU/
1.
/SELECT to select >Play messages.
2.
Press
MENU
•
If you have either new or old messages, the messages play automatically.
•
If you have both new and old messages:
◊
To play new messages, press
◊
To play old messages, press
press
MENU
Options during playback:
Press q VOL or VOL p to adjust the message playback volume.
•
/SKIP to skip to the next message.
•
Press
•
Press
/REPEAT to repeat the message. Press twice to hear the
previous message.
Press X/DELETE to delete the playing message.
•
/
•
Press
PLAY
when the telephone base is not in use.
STOP
when the telephone base is not in use.
SELECT
/SELECT.
/STOP to stop the playback.
/SELECT to select >Play new msgs.
MENU
to highlight >Play old msgs, then
or
53