Lucent Technologies PARTNER Advanced Communications System Release 1.0 Installation Manual page 27

Music-on-Hold Audio Source
The performance of music over telephone lines is a public performance under United States Copyright
law. Accordingly, in order for the performance of that music to be lawful, it must be licensed annually to
the user by the copyright owners or their representatives.
You can purchase a Magic On Hold system from Lucent Technologies, 1 800 446-5366, which includes
the required license for the first year. This license must be renewed annually.
1
Insert an RCA phono plug into the MUSIC ON HOLD
jack on the PARTNER ACS processor module
(located near the middle of the processor, below
the line jacks).
2
Route the cord as you did for the line and extension
cords, then connect the other end of the cord to
the audio source.
3
Place a call on hold and listen. If you do not hear
music at any setting, refer to "Music On Hold
(#602)" and "Music On Hold Volume (#614)" in
Chapter 5 of the PARTNER Advanced
Communications System Programming and Use
guide.
MUSIC ON HOLD
Jack
Audio Source
Installation Procedures 23