Automatic Line Selection; Outside Auto Dial - AT&T MERLIN 1030 Attendant's Manual

AUTOMATIC LINE SELECTION

This feature controls the order in which the MERLIN system selects out-
side lines when you lift your handset to place a call. If the first line in the
selection sequence is busy, the system automatically connects you to the
next line in the sequence so you don't have to touch a line button to get
a line. The system selects your personal line unless you program it to do
otherwise.
You can specify up to eight of your lines for an Automatic Line Selection
sequence. Do not mix different types of lines (such as outside lines and
intercom lines) in the sequence.
NOTE: If you're planning to program other features during this program-
ming session, program Automatic Line Selection first. If you're already
in the middle of a programming session, slide the T/P switch to the center
position, then back to P.
To program an Automatic Line Selection sequence:
Slide the T/P switch to the P position.
Dial * * .
Touch the line buttons in the order you want the system to select
them.
Slide the T/P switch to the center position.

OUTSIDE AUTO DIAL

To Program: T/P to P Touch the button Dial * 90 + outside
number T/P to center
To place an outside call to someone using an Outside Auto Dial button:
Touch the appropriate Shift button (large console only).
Touch the Outside Auto Dial button for that person.
The MERLIN system selects a PBX/Centrex line, turns on the speaker, and
dials the number for you.
Lift your handset when you hear the other person answer.
If no one answers:
Touch Speaker to cancel the call.
10-20-30
John
+
large console only
Speaker
+
21