Selecting A Personalized Ring - AT&T MERLIN 3070 Administration Manual

SELECTING A PERSONALIZED RING

The MERLIN system offers a choice of eight different ringing sounds for any voice
terminal. This enables people who sit in the same room to distinguish the ringing
of their voice terminals from that of others. The personalized part of the ring occurs
at the end of the ringing pattern, so it does not interfere with the distinctive ringing
patterns that signal whether a call is PBX/Centrex, intercom, or from the outside.
Follow the procedure below to program a Personalized Ring.
1.
Go to the voice terminal you want to program.
2.
Slide the T/P switch on the left side of the voice terminal to P.
The voice terminal rings every 5 seconds to remind you it is in program mode.
3. Touch Speaker repeatedly until you hear the ring you want.
4. If you have more features to assign, you can do so. Otherwise, slide the T/P
switch to the center position to return to normal operation.
41