Do Not Disturb - AT&T Merlin 1030 User Manual

DO NOT DISTURB

If you don't want to be interrupted as you work, use the Do Not
Disturb feature to prevent calls from ringing at your voice ter-
minal. Program this feature on a button with lights.
T/P to P Touch the button
To program:
T/P to center
To prevent calls from ringing at your voice terminal:
Touch Do Not Disturb.
The green light next to the button goes on.
When the Do Not Disturb feature is active, the green light next
to your line button flashes when you receive outside calls, but
your voice terminal does not ring. Calls transferred to you return
to the sender after two rings, and intercom calls to you get a busy
signal.
The feature remains active until you:
Touch Do Not Disturb again.
The green light next to the button goes out.
NOTE: If you have a Cover button for one or more people (see
"Call Coverage," page 34), their voice terminals ring when you
call them on the intercom from your voice terminal even if they
are using the Do Not Disturb feature.
Dial * 71
Do Not Disturb
Do Not Disturb
36