Some Custom Features Do Not Work - AT&T MERLIN 410 Service Manual

D. Some Custom Features Do Not Work
Your custom features are listed below:
Outside Auto-Dial
Intercom Auto-Dial
Saved Number Dialed
Last Number Dialed
Do Not Disturb
Privacy
Automatic Answer.
Idle Line Preference
Line Ringing Assignment
Paging
If the feature that does not work is "Outside Auto-Dial,'' "Last Number," or "Saved
Number," make sure that the "Outward Calls" switch on the control unit is set to the "Yes"
position to permit outward calls. If some of the features listed above do not work, complete
the following:
Step 1. Check the User's Guide and make sure that the feature is being used correctly.
Step 2. Reprogram the feature and try it again.
IF
The feature now operates properly,
The feature is being used correctly
and reprogramming it does not work,
Step 3. Go to a second voice terminal and program the feature on it.
IF
The feature works on the second voice
terminal,
The feature does not work on the
second voice terminal,
Quick Check Tests (cont'd)
THEN
Trouble cleared. Test is complete.
Go on to Step 3.
THEN
Trouble found. It is caused by the
first Voice Terminal.
Read the section on Maintenance
Exchange Procedures at the end of
this manual.
This test is inconclusive. Go on to the
General Quick Checks.
43