PROGRAMMING SPECIAL CHARACTERS WITH OUTSIDE
AUTO DIAL
You can put the following instructions in an Auto Dial sequence if
you need them to access Centrex, PBX, or alternate long dis-
tance or other computer services:
To program a 1.5 second pause into a dialing sequence,
touch Hold (pause).
To program a stop, touch Drop (stop).
To program a switchhook flash for Centrex and PBX
codes, touch Recall, touch Hold (pause).
AUTOMATIC LINE SELECTION
This feature controls the order of the lines you get when you
make a call. You can name all, some, or none of your lines for
Automatic Line Selection. Slide the T/P switch toward you to the
P position, dial
, touch the line buttons in the order you prefer,
and return the T/P switch to the center position.
Hold
Pause
Drop
Stop
Recall
Hold
+
+
+
Pause
+
555-1234
12