Table of Contents
Advertisement
9. Service Mode
9.15.6 Voltages
How to select the overview?
1. Push the cursor key ↑ or ↓ to highlight Voltages. (menu 9-48)
2. Press ENTER to select.
The voltage overview window will be displayed. (menu 9-49)
DIAGNOSIS
I2C
FORMATTER
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-48
9.16 Factory defaults
What is possible ?
The projector will set all settings to the factory defaults which are by default stored in the projector. All custom settings will be deleted
and the custom files will be removed.
How to return to the factory defaults ?
1. Push the cursor key ↑ or ↓ to highlight Factory defaults. (menu 9-50)
2. Press ENTER to select.
The Factory defaults confirmation and warning menu will be displayed. (menu 9-51)
3. Are you sure to restore the factory defaults ?
If yes, press the cursor key ↑ or ↓ to highlight Continue.
A message will be displayed. (menu 9-52)
If no, press the cursor key ↑ or ↓ to highlight Return.
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-50
Restoring the factory defaults can take a while. When finished, the projector will automatically reboot and
those factory settings will be loaded.
118
VOLTAGES
FAN1 VOLTAGE
14V
OK
FAN2 VOLTAGE
14V
OK
FAN3 VOLTAGE
17V
OK
15 VOLT
14V
OK
30 VOLT
29V
OK
12 VOLT
12V
OK
5 VOLT
5.0V OK
3.3 VOLT
3.1V OK
<EXIT> to return.
Menu 9-49
FACTORY DEFAULTS
ARE YOU SURE ?
THIS WILL OVERWRITE
ALL CUSTOM SETTINGS
AND DELETE ALL
CUSTOM FILES.
RETURN
CONTINUE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-51
Factory defaults
Please wait
Remaining time : x sec
Menu 9-52
R5976386 BARCOSLM G8 20/10/2004
Advertisement
Table of Contents
