Operating Instructions; Resetting The Test Tool; Navigating Through Menu's - Fluke 199B Service Manual

Fluke 19xB-19xC-2x5C
Service Manual

4.4 Operating Instructions

4.4.1 Resetting the test tool

Proceed as follows to reset the test tool:
•
•
•
•

4.4.2 Navigating through menu's

During verification you must open menus, and to choose items from the menu.
Proceed as follows to make choices in a menu :
•
•
•
•
4-4
Press to turn the test tool off.
Press and hold .
Press and release to turn the test tool on.
Wait until the test tool has beeped twice, and then release
has beeped twice, the RESET was successful.
Reset the test tool
Open a menu, for example press
as showed in Figure 4-1 will be opened.
Active functions are marked by
If more than one menu groups are available, they will be separated by a vertical line.
The menu you opened indicates that
shows the result of a V ac+dc measurement (
Press or to highlight the function to be selected.
Press ( ) to confirm the selection.
ENTER
The active function in the next menu group will be highlighted now. If the
confirmation was made in the last (most right) menu group, the menu will be closed.
Figure 4-1. Menu item selection
, then press
,inactive functions by
(that is the upper left reading)
READING 1
) on Input A (
V ac+dc
. When the test tool
.
( ). The menu
READING 1
.
).
on A
ws-read1.bmp