Operating Instructions; Resetting The Test Tool; Navigating Through Menu's - Fluke 190-104 Service Manual

4.4 Operating Instructions

4.4.1 Resetting the Test Tool

Proceed as follows to reset the Test Tool:
•
Press to turn the Test Tool off.
•
Press and hold
•
Press and release
•
Wait until the Test Tool has beeped twice, and then release
has beeped twice, the RESET was successful.

4.4.2 Navigating through menu's

During verification you must open menus, and to choose items from the menu.
Proceed as follows to make choices in a menu :
•
Reset the Test Tool
•
Open a menu, for example press
menu as showed in Figure 4-1 will be opened.
Active functions are marked by a yellow background or yellow characters.
If more than one menu groups are available, they will be separated by a vertical line.
The menu you opened indicates that
shows the result of a frequency measurement (
•
Press or
•
Press ENTER
The active function in the next menu group will be highlighted now. If the
confirmation was made in the last (most right) menu group, the menu will be closed.
.
USER
to turn the Test Tool on.
SCOPE
to highlight the function to be selected.
to confirm the selection.
Figure 4-1. Menu item selection
F2
, then press
(that is the upper left reading)
READING 1
) on Input A (
Hz
Performance Verification

4.4 Operating Instructions

. When the Test Tool
USER
( ). The
READING ...
).
on A
ws-read1.bmp
4
4-3