Resetting The Test Tool - Fluke 190-102 User Manual

ScopeMeter® Test Tool 190 Series II
Users Manual

Resetting the Test Tool

If you want to reset the test tool to the factory settings, do
the following:
1
Turn the test tool off.
2 Press and hold the USER key.
USER
3 Press and release.
The test tool turns on, and you should hear a double beep,
indicating the reset was successful.
4 Release the USER key.
USER
Now look at the display; you will see a screen that looks
like Figure 3.
12
Figure 3. The Screen After Reset