NORMA 6003/NORMA 6003+/NORMA 6004/NORMA 6004+
Users Manual
Select the Phasor Data to Display
Only phasor data of one wiring group can show on the phasor screen at the same time. The user can
select a group from the currently active wiring groups to display its phasor data on the phasor screen.
Enter Wiring Group Menu:
From the main screen of Phasor, select 2 (Wiring Group).
•
Select the Phasor Data to Display:
1. In Wiring Group, use the left and right arrow (M N) keys to select a channel or wiring group in
Channel Configuration. The wiring selection of the selected channel/wiring group is highlighted.
As you move the cursor, you can observe that the data displayed in the
instantly according to the current options.
2. Push J to go back to the main screen of Phasor.
The wiring group currently available for display depends on the wiring selection. See
Wiring Selection
Select Circuit Type
From the main screen of Phasor:
1. Select 3 (Y-Δ).
2. Push 3 (Y-Δ) to switch between the star (Y) and the delta (Δ) connection. The current
connection type is displayed on the tab page.
The Y-Δ option is only valid when a 3-phase wiring group is selected. When Y is selected, the
phasor table displays the voltage of each phase, and the phasor diagram is plotted in the form
of Y. When Δ is selected, the phasor table displays the voltage of each line, and the phasor
diagram is plotted in the form of Δ.
Zoom Phasor
In the Phasor screen, the Analyzer automatically determines the magnitude of each phasor in the
phasor diagram based on the current measurements. However, the user can also manually zoom the
phasor diagram of the voltage and current for ease of viewing.
Enter the Zoom Menu:
1. From the main screen of Phasor select 5 (Zoom).
The options are as shown in
2. Push 1 (
ZOOM
3. Push 3 (
4. To restore to default Auto Zoom, push 5 (
5. Push J to go back to the main screen of Phasor.
42
for details.
Table
18.
) to display
or
) or 4(
)to zoom in or out the currently selected phasor.
Note
Note
below its label as needed.
).
Auto
screen is updated
Phasor
Set the