The Device Setup Page - DeLorme Earthmate PN-40 User Manual

Device Setup menu
System menu options
70

The Device Setup Page

To open the Device Setup Page, press MENU, highlight Device Setup, and press ENTER.
Note: If you have added the Device Setup Page to the PAGE button sequence, it is no longer
available on menus. Press the PAGE button until the page appears.
Use the Device Setup Page options to modify the default settings on the Earthmate PN-40, such as
the battery type, backlight settings, and more. You can also view and manage internal and SD card
memory use and restore the device's default system settings. Use the arrow keypad to highlight
options.
Modifying the Device Preferences
To Modify the System Settings
To update GPS settings, WAAS status, battery type, and/or USB power setting, from the Device
Setup Page, highlight the System option and press ENTER. Press QUIT at any time to return to the
Device Setup Page.
• To update the GPS settings, highlight the GPS Setting drop-down list and press ENTER.
Highlight Normal, Power Saving, Disable GPS, or Demo Mode and press ENTER.
• To update the WAAS status, highlight the WAAS drop-down list and press ENTER. Select the
Enabled option to enable WAAS use or select the Disabled option to disable WAAS use.
Then, press ENTER.
Note: In most cases, a WAAS signal provides greater accuracy than a non-WAAS signal.
• To update the battery type, highlight the Battery Type drop-down list and press ENTER.
Select the battery type you are using and then press ENTER.
• To update the USB power setting, highlight the USB Power drop-down list and press ENTER.
Select the Enabled option to enable power from the USB port or select the Disabled option to
disable USB power.
• To view internal and SD card memory use, highlight Memory Use and press ENTER. The
Memory Use page displays the used memory and the total capacity on the device. To manage
memory use by deleting data, highlight Manage Memory and press ENTER. Select the check
box next to each data type you want to delete, highlight Delete Now, and press ENTER.