DeLorme Earthmate PN-40 User Manual page 25

Option
Show Info Fields
Arrange Info Fields
Change Info Fields
Use the steps below to reset the information fields to their default settings.
1. From the Map Page, press MENU.
2. Use the arrow keypad to highlight Info Fields and press ENTER.
3. Highlight Restore Info Defaults and press ENTER.
Note: If Show Info Fields displays, the information fields are hidden. Press ENTER to display
the information fields and then repeat steps 1 and 2.
To Turn Imagery On/Off
You can turn on imagery to display it on the map or turn it off if you do not want to display it on the
map.
1. From the Map Page, press MENU.
2. If Turn Imagery On is highlighted, imagery is turned off. Press ENTER to turn on imagery.
OR
If Turn Imagery Off is highlighted, imagery is turned on. Press ENTER to turn off imagery.
To Measure Distance and Area
Your Earthmate PN-40 has a measurement tool that allows you to measure the distance of a line or
perimeter and area of a polygon.
1. From the Map Page, press MENU.
2. Use the arrow keypad to highlight Measure Distance and press ENTER.
3. Use the arrow keypad to move the cursor to the area on the map where you want to place the
first point of the line/polygon.
Default Setting
Selected
2 narrow fields (when tracking)
4 narrow fields (when navigating)
Speed, Heading (when tracking)
Next Turn, Dist to Finish, Time to Turn, Dist to Turn
(when navigating)
The Map Page
Measuring distance on the map
Tip: Press QUIT to delete the
last measurement point. To
delete the entire measure-
ment object, press QUIT until
all measurement points are
deleted from the map.
23