DeLorme Earthmate PN-40 User Manual page 59

return to the route creation page.
Repeat this step for each point you want to include in your route.
4. Optional: If you do not want to include your current GPS position as a route point, highlight
Current Position and press ENTER. Highlight Remove and then press ENTER.
5. Highlight the Calculation Method drop-down list and press ENTER. Then, highlight Road or
Direct and press ENTER.
6. Highlight Navigate and press ENTER to calculate the route. If the calculation is successful, the
route is highlighted on the Map Page.
To View a Route
1. From the Routes Page, use the arrow keypad to highlight the route you want to view and press
ENTER.
2. Highlight View and press ENTER. The route displays on the Map Page and the map is in pan
mode.
3. To stop displaying the map, press QUIT to return to the Route Details page. The View button
has changed to Hide. Highlight Hide and press ENTER.
OR
From any default page (except the Satellite Page), press MENU, highlight Hide Route, and then
press ENTER.
To Simulate a Route
You can preview a route on the map using the Simulate Navigation feature. The route is highlighted
on the map and the device beeps at each applicable turn.
1. From the Routes Page, use the arrow keypad to highlight the route that you want to simulate
and press ENTER.
2. Press MENU, highlight the Simulate Navigation option, and then press ENTER. If you have
tracking enabled, the message, "Simulate Navigation will turn off Track Recording mode"
displays. Highlight OK and press ENTER. The cursor goes into simulate mode and plays the
route on the map.
3. To end simulation, press MENU, highlight the Stop Simulation option, and press ENTER.
The Routes Page
Road route with two points
Note: When you create a
direct route from your current
GPS location to a single point
and navigate to it, the route is
automatically deleted once you
stop navigating.
57