DeLorme Earthmate PN-40 Quick Start Manual

What's in the box
Earthmate GPS PN-40
➤

User Manual

➤
DeLorme Topo USA 7.0 DVD
®
➤
Pre-cut maps on 3 DVDs
➤
SD card
➤
USB cable
➤
2 AA batteries
➤
Set up your PN-40
Unscrew the D-rings on the battery cover to remove it. To insert an SD card, gently press the SD
card latch, insert the card in the slot, and press the slot down to close it. Insert 2 AA batteries
and replace the cover.
If you are using anything other than regular AA batteries, see the Device Setup section in the User Manual for info about changing
the battery type.
Take your PN-40 outside
Go outside to a place where you have a clear view of the sky.
Press and hold the Power button until you see the Welcome screen.
Wait while the PN-40 determines your location. It may take up to 10 minutes to determine your
location the first time you use your PN-40.
SD
Card
Connect your PN-40 to your computer with the USB cable. Power on
the PN-40 and select the method for connecting it to your computer.
Place the map DVD for your region in your computer's DVD drive and follow the installation
wizard instructions to copy detailed maps to the device's internal memory or to your SD card.
Earthmate GPS PN-40 Interface
IN/OUT— Zoom the
map in or out.
PAGE— Scroll through
PN-40 pages.
QUIT— Cancel an action
or move backward
through pages.
FIND— Search for 4 million
points of interest, waypoints,
addresses, and more.
MARK— Mark a waypoint at your
GPS location or the cursor location
when panning.
ARROW KEYPAD— Move the
cursor, pan maps, and navigate
the keyboard, menus, and lists.
MENU— Options in top
section specific to active
page. Options in bottom
section are on all pages.
ENTER— Choose a
menu, option, or field.
Get info about a place
on the map.
POWER— Hold to turn on.
To turn off, press POWER,
and then ENTER.