Basic Functions - DeLorme Earthmate PN-40 User Manual

Move your cursor to the edge
of the screen to pan the map in
that direction
Note: Manually panning the
map changes the focus of the
map from your GPS location to
the manually panned location.
Note: Once you have marked a
map object as a waypoint, you
can edit the waypoint details
(by highlighting the waypoint
information, pressing ENTER
and then modifying the infor-
mation), view it by highlighting
View and pressing ENTER, or
create a route by highlighting
Route and pressing ENTER.
10

Basic Functions

Panning the Map
There are two ways to pan the map:
• Manually pan the map by placing the cursor along the map edge and holding the arrow keypad
in the direction that you want to view the map. Press QUIT to center the map on your current
location.
• Automatically pan the map when GPS tracking/navigating. The map automatically pans in the
direction of travel when the GPS cursor travels outside of the map area.
Getting Information About a Map Object
There are two ways to get information about a map object.
• Press the arrow keypad to position your cursor over the map objects you want to learn more
about. The status bar at the bottom of the Map Page provides name information for the object.
Press ENTER to display the Info Page.
• Press ENTER at any time to get information about objects that are at your current GPS location.
Note: If multiple objects are found at the cursor location, the Multiple Objects screen displays a
list of the available objects at that location; objects you have created appear at the top of the
list. Use the arrow keypad to select an object and then press ENTER to view the Info Page for
that object. To save a map object as a waypoint, select it, highlight it, and press Mark.
Navigating vs. Tracking
What is the difference between navigating and tracking with the Earthmate PN-40?
• You are navigating with the Earthmate PN-40 when you use it to follow a route.
• You are tracking with the Earthmate PN-40 when the GPS is on, but you are not following a
route.
Using the Keyboard
The keyboard is accessible when you need to enter text, such as when editing a waypoint label.
Once the keyboard appears, use the arrow keypad to highlight the letter (A–Z), number (0–9),
symbol (+, -, /, &), or punctuation (period, comma, apostrophe, exclamation point) you want to use.
In addition, the following special functions are provided: