DeLorme Earthmate PN-40 User Manual page 28

Note: If you receive an Add
Map Error message because a
map is not updated for use with
your device, open your mapping
software, connect your device
to your computer, and select
the Data Exchange option on
the device. In your software,
click the Exchange button
on the toolbar to activate the
device. Then, send the map to
your device. See the software's
Help for more information.
Note: If you want to perma-
nently remove the map from
the Earthmate PN-40, press
MENU, use the arrow keypad
to highlight Data Detail, and
press ENTER. Then, use the
arrow keypad to highlight
the Delete button, and press
ENTER.
Orientation menu option
26
4. Highlight the map you want to hide or show. Information about the map, including the types
of data and location (internal or SD card), displays in the bottom section of the screen. If you
want to view more information about the map, press MENU, highlight Data Detail, and press
ENTER. The name, zoom level, scale information, save date, location (internal or SD card), data
types, and version information display. Press QUIT to return to the Data Management menu.
5. To show/hide a map, highlight it and press ENTER to select or clear the check box next to it.
6. Optional: To view the map's center on the screen, press MENU, highlight View Map, and press
ENTER.
To Change the Map Orientation
You can change the map orientation as you move based on your preference, but note that raster
maps rotate in 90° headings. Choose to make the map display:
• North Up—North is always represented at the top of the map screen.
• Heading Up—The direction in which you are traveling is always represented at the top of the
map screen. Displays the North Arrow in the top right corner of the map screen.
• Course Up—The direction of the finish of your route is always represented at the top of the
map screen. Displays the North Arrow in the top right corner of the map screen when
navigating.
You can modify the map orientation using the Orientation drop-down list in the Map Setup menu.
1. From the Map Page, press MENU.
2. Use the arrow keypad to highlight Map Setup and press ENTER.
3. Highlight the Orientation drop-down list and press ENTER.
4. Highlight North Up, Heading Up, or Course Up and press ENTER.
Note: If you want Heading Up or Course Up to automatically switch to North Up above the
specified scale, ensure the North Up above ... scale check box is selected If not, clear the
check box.
To Change the Map Style
You can change the map style using the Map Style drop-down list in the Map Setup menu. Topo
View displays all topographic data as it was saved in the map package; this is the default view.
Street View hides the contours and land cover for a clean road map that is easier to view when driving.