DeLorme Earthmate PN-40 User Manual page 5

on the screen. The map centers on your current location when the device gets a 2-D or 3-D fix.
The default view when a GPS fix cannot be obtained is your last GPS position.
If it takes a long time for the device to obtain a 2-D or 3-D fix, verify it has a clear view of the sky.
Be sure that trees, buildings, and other obstacles are not blocking the Earthmate PN-40. If the
device still cannot obtain a 2-D or 3-D fix, press the QUIT button to return to the Satellites Page,
press the MENU button, highlight the Set Current Location option, and then press ENTER. The
Map Page automatically displays. Pan the map to your current location and press ENTER.
To turn off the Earthmate PN-40, press the Power button and then press the ENTER button to
confirm you want to turn off the Earthmate PN-40.
Using the Buttons on the Earthmate PN-40
The buttons on the Earthmate PN-40 give you access to all of the functions on the device.
In/Out
Use the IN and OUT button to zoom the map in or out or scroll through a list.
• Press the IN (left) side of the button once to zoom the map in one level and show more detail.
• Press and hold the IN side of the button to zoom the map in to its maximum level.
• Press the OUT (right) side of the button once to zoom the map out one level and show less
detail.
• Press and hold the OUT side of the button to zoom the map out to its maximum level.
• Press IN or OUT to scroll backward or forward through a list.
Page
Use the PAGE button to scroll through the enabled pages on the Earthmate PN-40. The default
sequence is:
• Satellites
• Map
• Compass
• Trip Info
• Route Directions (available when navigating)
For an overview of what you can view and do on each page and each page's menu functions, see
Appendix A on page 77.
Getting Started
Tip: Use the Device
Setup>Page Order settings to
add, remove, or reorder the
pages that display when you
press the PAGE button. For
more information, see the To
Modify the Page Order Set-
tings section on page 75.
3