DeLorme Earthmate PN-40 User Manual page 66

Tip: Use a small interval to
record a detailed track of a
new trail. Use a large distance
interval to record your location
during a long trip.
Tracks menu
Tip: Select Start Recording
New Track to save a detailed
track of a specific path.
Select the Overwrite Points
option if you are interested in
knowing only where you have
traveled most recently.
64
1. From the Tracks Page, press MENU.
2. Highlight Edit Track Settings and press ENTER.
3. Highlight the Record Points by drop-down list and press ENTER.
4. Highlight Time or Distance and press ENTER.
5. Highlight the Recording Interval field and press ENTER.
6. Use the arrow keypad to increase/decrease the recording interval value. If you selected Time
in step 4, the recording interval is expressed in seconds. If you selected Distance in step 4, the
recording interval is expressed in feet.
7. Highlight the When Track is Full drop-down list and press ENTER.
8. Highlight Overwrite Points, Stop Recording, or Start Recording New Track. This option
determines how the device reacts when the track reaches its maximum number of points. If
you select the Overwrite Points option, the oldest points in the track are replaced with new
points. If you select Stop Recording, the device stops recording points when it is full. If you
select Start Recording New Track, the device saves the track and starts recording a new track.
9. Press QUIT to return to the Tracks Page.
To Enable or Disable the Reset Info Menu
The Reset Info menu allows you to synchronize your Trip Info with a track when you press Save or
Clear on the Track Details Page. This feature is enabled by default.
1. From the Tracks Page, press MENU.
2. Highlight Edit Track Settings and press ENTER.
3. To enable the Reset Info menu if the check box is cleared, highlight the Prompt to Reset Trip
Info check box and press ENTER.
OR
To disable the Reset Info menu if the check box is selected, highlight the Prompt to Reset
Trip Info check box and press ENTER.
4. Press QUIT.