DeLorme Earthmate PN-40 User Manual page 21

Information Field Option
Coordinates: Primary
Coordinates: Secondary
Course
Device Odometer
Distance to Finish
Distance to Next Stop
Distance to Next Turn
Elevation: Altimeter
Elevation: GPS
Elevation: Maximum
Elevation: Minimum
Description
The coordinates for the current GPS location, cursor
position,or map center in the primary format. The default is
Lat/Lon. You can change the format in Device Setup>
Units>Coordinates: Primary.
The coordinates for the current GPS location, cursor
position,or map center in the secondary format. The default
is UTM/UPS. You can change the format in Device Setup>
Units>Coordinates: Secondary.
The direction of travel on a route from the starting location
to the destination (finish or next stop). Expressed in
degrees.
The total distance traveled in all trips.
The distance from the current location to the route finish.
The distance from the current location to the next stop in the
route.
The distance from the current location to the next turn in the
route.
The altitude (height) above or below sea level based on the
barometric altimeter reading. If the altimeter is calibrating, a
red exclamation point displays. If the altimeter is disabled,
dashes display.
The altitude (height) above or below sea level based on the
GPS reading.
The maximum elevation achieved. Expressed in distance.
This field may be reset when you clear Trip Info.
The minimum elevation achieved. Expressed in distance.
This field may be reset when you clear Trip Info.
The Map Page
19