DeLorme Earthmate PN-40 User Manual page 27

9. NOAA Nautical Charts
10. Satellite Imagery (SAT10)
11. DeLorme Topographic Data
To open Data Layering, from the Map Page, press MENU, use the arrow keypad to highlight Map
Setup, and press ENTER. Then, highlight Data Layering and press ENTER.
• To globally turn a type of data on or off so it cannot be viewed on your device, highlight it and
press ENTER to clear or select the check box next to the data type.
• To change the order in which data is layered, highlight the data type, then press the arrow
keypad to highlight the up or down arrow. Press ENTER to move the data type up or down in
the list. Press the arrow keypad to move back to the list.
• To select/deselect all check boxes, press MENU, highlight Select All or Deselect All and press
ENTER.
• To reset the default layer settings (all check boxes selected and data ordered as in the list
above), press MENU, highlight Restore Layer Defaults and press ENTER.
To Show/Hide Maps from a DeLorme Mapping Program
After you import a map package from a compatible DeLorme mapping program, you can view or
hide it on the Earthmate PN-40 using the Data Management option. You may want to hide a map
to see what is underneath it; for example, raster maps are displayed above vector maps. To change
the priority of how different types of map data are displayed, see To Layer Your Data on page 24.
1. From the Map Page, press MENU.
2. Use the arrow keypad to highlight Map Setup and press ENTER.
3. Highlight Data Management and press ENTER. The Data Management menu lists the maps
that are in the device's internal memory or on an SD card in the device. A map is shown on the
device if its check box is selected and is hidden if its check box is cleared.
Note: To select/deselect all check boxes, press MENU, highlight Select All or Deselect All
and press ENTER.
The Map Page
Data Layering
Data Management
25