Hapter; Using Altiview; About The Main Window - Altigen AltiView Manual

Using AltiView

Once you log in as described in "Logging In" on page 5, the AltiView main
window appears. This window provides tools to manage and monitor calls,
to facilitate management of your personal contacts, and to configure your
AltiServ phone and voice mail options. Configuration is described in
Chapter 4, Configuring Your Station Settings.
Figure 1. AltiView main window

About the Main Window

The window consists of the following displays and buttons:
• The Call Status panel displays the status of the currently active call, a
list of any calls on hold, and the current time.
• The Directory panel has two tabs: one showing a current List of Calls,
the other showing a log of current and past Voice Messages.
• The Dial and Do Not Disturb functions provide buttons to place, hold,
or redial calls, and to set your system to DND (Do Not Disturb). This
turns off ringing and forwards all incoming calls according to your
"Enable Busy Call Handling" settings. See "Busy Call Handling and
No Answer Handling" on page 47.
C 3
H A P T E R
AltiView Manual 15