Hiding Or Exiting Altiview; Using The Windows Tray Phone Icon; Resizing The Display - Altigen AltiView Manual

where <IP address> is the AltiServ system you want to connect to. An
example of the IP address format is 123.234.231.143
If you do not get a response, contact your LAN administrator for support.
Next, check to verify if ports are open.

Hiding or Exiting AltiView

When you minimize the AltiView desktop by clicking the
Minimize symbol (the dash), it is hidden—it doesn't appear
anywhere in the Windows desktop except as a phone icon in
the tray in the lower right corner, as discussed below.
To exit AltiView entirely, right click the phone icon and select Exit.
Pop Up AltiView when You Get a Call
You can configure AltiView to pop up when you have incoming calls. Pop
ups work when AltiView is hidden (minimized) but not when you have
exited. See "Screen Pop, Audio Beep, and Auto Close" on page 39.

Using the Windows Tray Phone Icon

After you log in, the AltiView icon (a phone) is displayed on the Windows
tray, normally at the bottom right of your screen. When you have new voice
mail, the phone grows a small yellow envelope.
If the AltiView interface is not on your Windows desktop, but this icon
appears in the Windows tray, you double-click it to open the AltiView main
window, or you can right click it to pop up a menu, then select the AltiView
window you want to open.

Resizing the Display

You can resize many AltiView windows using the standard Windows
method: place the cursor at a window edge or corner, then drag the window
to the size you want.
AltiView Manual 9