Front Bezel - Compaq DL580 - ProLiant - 1 GB RAM Maintenance And Service Manual

Front Bezel

To remove the front bezel:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the Power On/Standby switch. See "Power On/Standby Switch with LED
Indicators" earlier in this chapter.
3. Remove the 14 Torx T-15 screws
4. Loosen the captive T-15 screw
Figure 2-4. Removing the front bezel
Reverse steps 1 through 4 to replace the front bezel.
.


, then pull the front bezel

3
2
Removal and Replacement Procedures 2-11
away from the server.

1