Compaq DL580 - ProLiant - 1 GB RAM Maintenance And Service Manual page 189

14 Compaq ProLiant DL580 Server Maintenance and Service Guide
SCSI tape drives See tape drives
SDRAM See memory
security levels
Caution, defined 3-53
Critical, defined 3-53
Repaired, defined 3-53
Status, defined 3-53
security, ASR-2 3-67
serial connector, identified 4-4
serial port, test error codes 3-28
server
unloading from pallet 2-6
Server Documentation CD 2-36,
3-58
server preparation
rack warnings 2-6
removing power 2-5
warnings and precautions 2-7
set configuration command
issued 3-44
shock hazard symbol,
identifying 2-3
signal cable kit, part number 1-7
signal cables
CD-ROM drive, part
number 1-7
data cable assembly, PS and MB,
part number 1-7
diskette drive data, part
number 1-7
fan cable assembly, left (1 and 2
inch), part number 1-7
fan cable assembly, rear (7 and 8
inch), part number 1-7
fan cable assembly, right (3 and
4 inch), part number 1-7
fan cable assembly, right (5 and
6 inch), part number 1-7
internal/external VHDCI, part
number 1-7
simplex board See SCSI hard drive
backplane board
slot status indicator, defined 4-17
Smart Array 4200 controller
data transfer method 5-10
dimensions 5-10
drives supported 5-10
height 5-10
power requirements 5-10
SCSI port connectors 5-10
specifications 5-10
temperature range 5-10
thickness 5-10
transfer rate 5-10
SmartStart and Support Software CD
contents 3-5
running utilities 3-5
running utilities from 3-6
starting from 3-4
soft firmware upgrade required 3-44
software error, recovery from 3-59
software errors
recovery from 3-61
recovery start option 3-61
recovery timeout 3-61
software, required for servicing 2-1
specifications
CD-ROM drive 5-6
diskette drive 5-5
hard drive 5-3
hot-plug power supply 5-4
Integrated Smart Array
Controller 5-9
memory 5-5
NC3134 Fast Ethernet NIC 5-8
Smart Array 4200
controller 5-10
system unit 5-2
standby recovery
server option 3-61
server port 3-61
timeout 3-61
standby, effects 2-4
storage automatic reconstruction,
defined 3-71
storage enclosure on SCSI bus X
has a cabling error 3-45
indicated a door alert 3-45
indicated a power supply
failure 3-45
indicated an overheated
condition 3-46
indicated that a fan module is
unplugged 3-47
indicated that the fan
failed 3-46
indicated that the fan is
degraded 3-46
is unsupported with its current
firmware version 3-46
wide SCSI transfer failed 3-47
storage fault recovery tracking,
defined 3-71
Survey Utility, viewing 3-54
swapped cables or configuration error
detected
cables may be
interchanged 3-48