X Or Higher Low-Profile Cd-Rom Drive - Compaq DL580 - ProLiant - 1 GB RAM Maintenance And Service Manual

24X or Higher Low-Profile CD-ROM Drive

The ProLiant DL580 server ships with a 24X or higher low-profile CD-ROM drive. This drive
may be removed with the removable media assembly still secured to the server, or by removing
the removable media assembly.
To remove the 24X or higher low-profile CD-ROM drive:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the top access panel. See "Top Access Panel" earlier in this chapter.
3. Remove the cables from the rear of the drive. See "24X or Higher Low-Profile CD-ROM
Signal and Power Cables" later in this chapter.
4. Lift out the removable media assembly. See "CD-ROM and Diskette Drive Removable
Media Assembly" earlier in this chapter.
5. Loosen the two captive thumbscrews
diskette drive removable media assembly, then lift the plastic stop
removable media assembly.
6. Move the CD-ROM
media assembly.
Figure 2-11. Removing the CD-ROM drive
Reverse steps 1 through 6 to replace the 24X or higher low-profile CD-ROM drive.
back, then out of the CD-ROM and diskette drive removable

1
1
2
Removal and Replacement Procedures 2-19
that secure the plastic stop to the CD-ROM and


3
away from the