Front Bezel Door (Tower Model Only)
To remove the front bezel door:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Swing open the front bezel door approximately 45 degrees.
3. Lift the front bezel door
Figure 2-2. Removing the front bezel door (tower model only)
Reverse steps 1 through 3 to replace the front bezel door.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before handling the components.
up, then pull it away from the chassis hinges
Removal and Replacement Procedures 2-9
.
2
1