Compaq DL580 - ProLiant - 1 GB RAM Maintenance And Service Manual page 86

Table 3-2
POST Error Messages
continued
Error Code Audible Beeps
1785-External None
Cable(s) Attached to
Wrong SCSI Port
Connector(s).
Drive positions None
cannot be changed
during Capacity
Expansion.
Drive positions None
appear to have
changed.
Configuration None
information
indicates drive
positions beyond
the capability of this
controller. This may
be due to drive
movement from a
controller that
supports more
drives than the
current controller.
Configuration None
information
indicates drives
were configured on
a controller with a
newer firmware
version.
Diagnostics and Troubleshooting 3-17
Probable Source of Problem
Configuration error
Configuration error
Configuration error
Configuration error
Configuration error
Recommended Action
Power down system and swap
SCSI power connectors to
prevent data loss.
Run Array Diagnostic Utility
(ADU) if previous positions are
unknown. Then power down
system and move drives to their
original positions.
Run Array Diagnostic Utility
(ADU) if previous positions are
unknown. Then power down the
system and move drives to their
original positions.
To avoid data loss, power down
and reattach drives to the
original controller.
To avoid data loss, reattach
drives to original controller or
upgrade controller firmware to
the version of the original
controller using Option ROMPaq.
Press F1 to resume.
continued