Top/Side Cover - IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual

Top/side cover

Note: This illustration is for reference only; your hardware may differ.
To remove the top/side cover, do the following:
1. Power-off the workstation, if it is on.
2. Unplug the workstation.
3. Remove the cover (see "Side cover removal" on page 63).
4. Remove the front bezel (see "Bezel" on page 94).
5. Remove the handle assembly (see "Handle cap" on page 96).
6. Remove the four screws from the back of the workstation and put them in a
7. Using a screwdriver, gently pry the cover away from the workstation in the
104
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
Note: Read "Before you begin" on page 41 and the safety notices at "Safety notices
(multi-lingual translations)" on page 135.
safe place.
rear and slide the unit away from the workstation.