workstation.
When you are finished installing options and have installed the side cover, turn the
two front stabilizing feet a quarter turn out from the workstation and set it
carefully back on its feet.
Stabilizing feet with release tabs: Some models have feet that utilize a release
tab mechanism. The following instructions explain how to work with this type of
stabilizing foot:
1. Place the computer on its side.
2. Locate the release tab inside a foot; then, lift up on the tab.
3. Rotate the foot inward to the unlocked position; then, remove the foot from the
4. Align the post in the center of the foot with the hole on the bottom of the
62
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
computer.
computer and place the foot between the guides indicated on the computer.