Speaker - IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual

7. Free the processor from the system board by rotating the processor socket lever
8. Lift the processor up and out of the computer.
9. To install a processor, reverse the previous steps.

Speaker

To remove the speaker, do the following:
1. Power-off the computer and remove external cables.
2. Remove the cover and support bracket (see "Removing the cover" on page 45
90
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
a. Detach the fan sink cable.
b. Loosen the two captive screws on either side (in leaf spring enclosures) of
the fansink.
c. With the two captive screws loosened, pivot the leaf spring assemblies
outward and out of the notches on the fansink assembly.
d. Lift the fan sink up and out of the computer.
Note: It may be necessary to gently twist the fansink to loosen it from the
processor.
Important: Be careful when handling the adhesive material on the
processor. If the adhesive material on the processor will be
reused, do not contaminate it. If replacement adhesive material
is provided with the replacement part, be sure to remove all
traces of existing adhesive material from the processor before
applying the new adhesive material.
arm upward to its maximum vertical position.
Note: When reconnecting the fansink cable to the system board, be sure to
connect the cable to the connector marked "CPU fan".
Note: Read "Before you begin" on page 41 and the safety notices at "Safety notices
(multi-lingual translations)" on page 135.
and "Removing the frame support bracket" on page 46).