Top/Side Cover - IBM xSeries 200 Hardware Maintenance Manual

Top/side cover

Before you begin:
v Read "Safety information" on page 125.
v Review the information in "Before you begin" on page
44.
To remove the top/side cover, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the cover (see "Removing the side cover" on
page 46).
4. Remove the front bezel (see "Removing the bezel" on
page 48).
5. Remove the handle assembly (see "Handle assembly"
on page 96).
Chapter 6. FRU information (service only)
95