Removing The Frame Support Bracket; Working With Adapters - IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual

4. Press the buttons on either side of the computer cover and lift the cover from
To replace the cover, see "Replacing the cover" on page 56.

Removing the frame support bracket

You must remove the frame support bracket to access many of the components of
the desktop model computer. To remove the frame support bracket, perform the
following steps:
1. Pivot the drive cages until the pivot locks catch the front of the desktop chassis,
2. Lift the frame support bracket out of the computer.
To replace the frame support bracket, reverse the steps.

Working with adapters

The computer comes with adapter connectors or slots. The AGP video adapter is
installed in the AGP slot. You can install up to three low-profile PCI adapters in
PCI slots 1 through 3. All PCI slots are 32-bit, 33 MHz slots.
46
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
the computer.
holding the drive cages in place.