Raid Configuration Utilities; Intel Platform Raid Configuration; Set Raid Controller In Legacy Mode; Enabling Intel Onboard Sata Raid - Acer AT310 F2 Service Manual

RAID Configuration Utilities

Note: RAID supports various by models, please refer to the system specifications or
installation and configuration guide for more detailed information.

Intel platform RAID configuration

Set RAID Controller in Legacy Mode

NOTE. Currently, Intel onboard SATA RAID only supports Legacy mode. Please change
PCI ROM Priority setting from EFI Compatible ROM to Legacy ROM in BIOS Setup.
PCI ROM Priority

Enabling Intel Onboard SATA RAID

1.
Turn on the server and the display monitor. If the server is already turned on,
please close all open applications and then restart the server.
2.
During POST, press F2 to access the BIOS Setup Utility.
3.
Please select Advanced.
4.
Please select SATA Configuration.
5.
You might see below information:
SATA Controller
SATA Mode
6.
Please change SATA Mode from AHCI Mode to RAID Mode
SATA Mode
7.
Please confirm SATA SW RAID Option is Intel RAID
8.
Please press F10 to save the setting before exit from BIOS Setup.

Entering Intel onboard SATA RAID BIOS Utility

Please press CTRL-I when you see the RAID BIOS during POST. The Intel(R) Rapid Storage
Technology – Option ROM will display on the screen.

Loading Factory Default Setting

1.
In the Configuration menu, select third option Reset Disks to Non-RAID. The current
adapter settings appear. Please click on Next to change the setting.
2.
Select the hard disk drive that should be reset and press ENTER to complete your
selection.
3.
Then press Y to reset RAID data on selected hard disks.
[Legacy ROM]
[Enabled]
[AHCI Mode]
[RAID Mode]
63