Cisco CP-7970G Administration Manual page 84

Network Configuration Menu
For information about the keys you can use to edit options, see
Table 4-2 Network Configuration Menu Options
Option Description
IPv4 Configuration Internet Protocol v4 address menu. In the IPv4
Configuration menu, you can do the following:
•
•
For more information on the IPv4 address fields, refer
to the specific field within this table.
IPv6 Configuration Internet Protocol v6 address menu. In the IPv6
Configuration menu, you can do the following:
•
•
For more information on the IPv6 address fields, refer
to Table
For more information on SLAAC, refer to Deploying
IPv6 in Unified Communications Networks with Cisco
Unified Communications Manager 7.1.
MAC Address Unique Media Access Control (MAC) address of the
phone.
Host Name Unique host name that the DHCP server assigned to
the phone.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
4-6
Enable or disable the phone to use the IPv4
address that is assigned by the DHCPv4 server.
Manually set the IPv4 Address, Subnet Mask,
Default Routers, DNSv4 Server, and Alternate
TFTP servers for IPv4.
Enable or disable the phone to use the IPv6
address that is assigned by the DHCPv6 server, or
to use the IPv6 address that the phone acquires
through Stateless Address Autoconfiguration
(SLAAC).
Manually set the IPv6 Address, Subnet Prefix
Length, Default Routers, DNSv6 Server, and IPv6
TFTP servers.
4-5.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Editing Values, page
To Change
Unlock network configuration options.
1.
Scroll to IPv4 Configuration and press the
2.
Select softkey.
1. Unlock network configuration options.
Scroll to IPv6 Configuration and press the
2.
Select softkey.
Display only—Cannot configure.
Display only—Cannot configure.
4-3.
OL-23092-01